Optical Laser Source AOS200
High-stabilization Light Source AOS200 can be Dual or Triple wavelength. Auto-Wave ID output, work with TriBrer OPM AOP100 to help technician to test the fiber loss.
Tiv tauj peb1~3 wavelengths + VFL
High stabilization, built-in optic isolator
270Hz, 1KHz, 2KHz modulation output
Built in VFL (xaiv tau)
Zog txuag hom
Auto-Wave ID output, work with TriBrer OPM AOP100
Ib xyoos lav thiab Peb-xyoo pom zoo calibration ncua sij hawm
Qauv |
M8 M3 S3 S4 S5 S6 V01 V10 |
|
Lub wavelength(nm) |
850 1300 1310 1490 1550 1625 1mW VFL 10mW VFL |
|
Stabilization * |
±0.05dB / 1 hour; ±0.1dB / 8 teev |
|
Tso zis zog |
> - 6dBm @ 1310nm / 1490nm / 1550nm / 1625nm / > -10 dBm @ 850nm / 1300nm |
|
Kev hloov kho |
270Hz, 1KHz, 2KHz |
|
Txuas |
FC/PC (or customize) |
|
Pib Fais fab tuag |
Tsis muaj kev ua haujlwm hauv 10 feeb (tuaj yeem muab tso tseg), Tsawg roj teeb zog |
|
Build in VFL (xaiv tau) |
1mW or 10mW or customize |
|
Wave ID |
Yog lawm |
|
Roj teeb Charge |
Yog lawm | |
Ua Si Sijhawm |
Saum toj no 40 teev |
|
Fais fab mov |
UA* 3 roj teeb lossis AC / DC fais fab mov adapter |
* After 5 minutes warm-up, 20±3℃, CW, FC connector, with optic isolator
Loj(H*W*D) |
170mm * 97mm * 38mm |
|
Zaub ntau yam | Txog 380 g | |
Cia Kub | -20 -- +60°C, < 90%RH | |
Ua haujlwm kub | -10 -- +50°C, < 90%RH |
AOS200-X-XX
Qauv |
VFL |
AOS200-M3M8 = 850/1300nm | Tsis muaj = N/A |
AOS200-S3S5 = 1310/1550nm | V01 = 1 mw |
AOS200-S3S4S5 = 1310/1490/1550nm | V10 = 10 mw |
AOS200-S3S5S6 = 1310/1550/1625nm |